High-strength threaded inserts for one-sided installation in thin sheet metal, tubes and panels
Rivet nuts, also called blind rivet nuts, nutserts or rivnuts, give thin sheet metal, tubes and panels a strong, reusable internal thread, installed entirely from one side. Excel Trading Corporation supplies round body, half hexagon and full hexagon rivet nuts in steel and stainless steel, and four legged split rivet nuts for plastics, fibreglass and other soft or brittle materials.
| Type | Body | Best for | Sizes & materials |
|---|---|---|---|
| Round Body Rivet Nut | Round, knurled | General sheet metal work in round holes | M3 to M12 · Steel, SS 304 |
| Half Hexagon Body Rivet Nut | Part hexagonal | Higher torque, better spin-out resistance than round | Steel, stainless steel |
| Full Hexagon Body Rivet Nut | Fully hexagonal | Maximum spin-out resistance under high torque | M3 to M12 · Steel, stainless steel |
| Split Rivet Nut | Round, four split legs | Plastics, fibreglass, plywood, soft or brittle panels | M6, M8 · Mild steel |
A rivet nut, also called a blind rivet nut, nutsert or rivnut, is a threaded insert that is installed from one side of a panel to give thin sheet metal, tubes or plastics a strong, reusable internal thread. It is pushed into a drilled hole and set with a rivet nut tool, which pulls the threaded end so the body collapses and grips the back of the panel. Rivet nuts are used wherever a nut cannot be held behind the panel, such as in closed sections, enclosures, vehicle bodies and HVAC ducting.
Choose a round body rivet nut for general sheet metal work in round holes. Choose a half hexagon or full hexagon body rivet nut when the joint will see higher tightening torque, because the hexagonal body sits in a hexagonal hole and resists spinning, with the full hex body giving the most resistance. Choose a split rivet nut, with four legs that fold out behind the panel, for plastics, fibreglass, plywood and other soft or brittle materials where a wide grip and high pull-out strength are needed.
A standard rivet nut forms a small collar behind the panel as its body collapses, which works well in metal sheet of the right thickness. A split rivet nut has a body cut into four legs that fold right out behind the panel, giving a much larger footprint and higher pull-out strength in soft or brittle materials such as plastics, fibreglass and plywood. Excel Trading Corporation supplies split rivet nuts in M6 and M8 mild steel, alongside round, half hex and full hex rivet nuts.
Use the Request a Quote button on this website and add the rivet nut type, thread size, material and quantity, or call +91 7204435253 or email info@exceltrading.in with the same details. If you know your panel material and thickness, include them so we can confirm the right part. Excel Trading Corporation supplies rivet nuts to OEMs, fabricators and body builders across India from Bengaluru.